Section 3: Using PCS Service Features
3A: The Basics
89
Responding to Call Waiting
Call Waiting alerts you to incoming calls while you’re on a call by
sounding a beep. The display screen informs you that a call is coming in
and shows the caller’s phone number (if it is available and you are in
digital mode).
To respond to an incoming call while you’re on a call:
䊳
Press
. This puts the first caller on hold and answers the
second call.
䊳
To switch back to the first caller, press
again.
Tip:
For those calls where you don’t want to be interrupted, you can
temporarily disable Call Waiting by pressing
before placing
your call. Call Waiting is automatically reactivated once you end the call.
Making a Three-Way Call
With Three-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be charged for
each of the two calls.
1.
Enter a number you wish to call and press
.
2.
Once you have established the connection, press
for
3-Way Call
.
3.
Dial the second number you wish to call and press
.
4.
When you’re connected to the second party, press
once more
to begin your three-way call.
If one of the people you called hangs up during your call, you and the
remaining caller stay connected. If you initiated the call and are the first
to hang up, all three callers are disconnected.
Tip:
You can also begin a Three-Way Call by displaying a phone number
stored in your Internal Phone Book, Call History or Messaging.
Note:
Call Waiting and Three-Way Calling are not available while roaming
off the Sprint Nationwide PCS Network.
Summary of Contents for A500 - SPH Cell Phone
