2
Hardware Interconnections
All required cabling is included in the WSM package: one PC connector cable, four long 8-pin mini-DIN
connector cables, and seven short 8-pin mini-DIN connector cables:
As shown in the illustration on the left, begin by connecting
one end of the PC connector cable to the joystick/MIDI port of
your computer’s Sound Blaster 16 card and the other end to
the “PC” connection on the IF6P.
If you need to remote your receivers 20 feet or more from the
computer, follow the instructions on page 4 of this manual.
If not, take one of the long 8-pin mini-DIN connector cables
and connect one end to the IF6P “1 Out” and the other end to
the rear panel UR6D (or UR6DX) “Remote In.”
WSM PC connector cable
WSM 8 pin mini-DIN connector cables
