Software Installation
If all is working correctly, when you click on the “Settings” button, a dialog
similar to the one shown on the left will appear. At this point, you have
enabled the Joystick/MIDI port on your Sound Blaster 16 card and have
verified that the required Creative Labs software driver is installed and
operating correctly. Click OK in all open dialog boxes and close the
Control Panel.
Now you’re ready to insert the
WSM floppy disk! After doing so,
start up the Windows Explorer and
open your floppy drive (usually
drive A). The display will look like
the illustration on the left.
Before installing the WSM application,
you need to first copy the font file
named “Lucon” onto your hard disk.
This file
must
be placed inside the Fonts
folder in the Windows folder, as shown
in the illustration on the left. From within
Windows Explorer, you can simply
mouse-drag the “Lucon” file from the
floppy drive to the Fonts folder.
Once this is completed, simply
double-click on the “WSM.exe” icon to
begin the automatic installation
procedure. Follow all on-screen
instructions, and you’re done!
NOTE: In case you lose this manual,
we’ve included an electronic copy of it
on the WSM installation disk. This file
(which can be viewed onscreen or print-
ed out) is in Acrobat PDF format. To
open it, you need the Adobe Acrobat
Reader, which is available for free
downloading from the Adobe website
or from many other websites.
6
