Sammode SA
N° : 414 693 rév.F
24, rue des Amandiers – F 75020 Paris
8/11
Décembre 2015
EN
CONFORMITY DECLARATION
I undersigned Rudy Bigand, Technical Director of the company Sammode SA, located at 24 rue des Amandiers 75020
PARIS, declares that following products (group IIIC category 2D) :
-
HUYGENS
150 pour 1 lampe SHP 150 Watts / Classe 1 / 230 Volts - 50Hz
-
HUYGENS
250 pour 1 lampe SHP 250 Watts / Classe 1 / 230 Volts - 50Hz
-
HUYGENS
400 pour 1 lampe SHP 400 Watts / Classe 1 / 230 Volts - 50Hz
meet the following regulatory requirements:
ElectroMagnetic compatibility Directive (EMC) 201/30/UE
To ensure compliance the product meets specific standards lighting fixtures: EN 55015 relating to radio disturbance
and EN 61547 on immunity. Moreover, the active components are themselves in conformity with the EMC Directive
Low Voltage Directive (LVD) 2006/95/EC of 12 December 2006
To ensure compliance the product meets the standards of fixtures series EN 60598, the active components are
themselves consistent with the LVD.
All equipment leaving the assembly shall be test operation and safety, especially dielectric and earthing continuity.
Decree No. 2005-829 of 22 July 2005
Directives 2011/65/UE (on the restrictions on the use of certain hazardous substances in Electrical and Electronic
Equipment) Directive 2012/19/UE and (Known as WEEE, Waste Electrical and Electronic Equipment).
ATEX Directive 94/9/EC of 23 mars 1994
To ensure compliance the product meets the followings standards:
-
EN 60079-0:2012/A11 :2013 (Explosive Atmospheres - Equipment – General requirements),
-
EN 60079-31 : 2014 (Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t")
-
The EC-type examination certificate INERIS 01 ATEX 0021X delivered by the notified body
INERIS, 0080, F-60 550 Verneuil-en-Halatte.
Paris 18 December 2015
RUDY BIGAND
Technical Director
The notified body involved in the production control stage, or the product itself is : INERIS, n° 0080, F-60550 Verneuil-
en-Halatte.
