Rev: A0
Rotatable Wallpack
LED Luminaire Instruction
Warning
：
1. Do not use an electric generator to test this fixture;
2. This luminaire must be installed in accordance with your local electrical codes and requirements;
3. Do not install the luminaire on rainy days, to avoid lightning strike and damage to luminaire.
Installation notice
：
1. This luminaire must be installed by a qualified electrician to avoid electric shock and fire accident;
2. Wear gloves before installation in order to avoid injury;
3. Turn off the power immediately when there is smoke and fire during installation, ensure electrical
professionals make necessary corrections;
4. This luminaire is suitable for outdoor use.
Step 1
：
Use a screwdriver to loosen the screws connecting the lamp base so as to remove the lamp
base cover
（
Figure 1 & Figure 2
）
;
Installation :
Figure 1
Figure 2
Standard wire:
L/live wire
：
Black\Brown
；
N/null wire:White\Blue
；
Ground wire
：
Green\Yellow-green.
Note: To meet the requirements of DLC certification, lamps are limited to the same side of the
light-emitting use (see Figure 1), not in different directions of irradiation use (see Figure 2/3).
Warning/Advertisement
：
SUITABLE FOR WET LOCATIONS
CAUTION – RISK OF SHOCK
DISCONNECT POWER BEFORE SERVICING
CAUTION – RISK OF FIRE
MIN 75 °C SUPPLY CONDUCTORS
SUITABLE FOR OPERATION IN AMBIENT NOT EXCEEDING 113°F
CONVIENT AUX EMPLACEMENTS MOUILLÉS
ATTENTION – RISQUE DE CHOC
COUPER L’ALIMENTATION AVANT L’ENTRETIEN
ATTENTION – RISQUE D’INCENDIE
LES FILS D’ALIMENTATION 75 °C MIN
PEUT ÊTRE UTILISÉ À UNE TEMPÉRATURE AMBIANTE N’EXCÉDANT PAS 45 °C
Any further questions or interests, please visit
Any further questions or interests, please visit
Installation Instruction
Installation Instruction
