1. TURN OFF POWER
2. REMOVE LAMPS(RECYCLE AS NEEDED)
3. REMOVE FLUORESCENT, BALLAST,
SOCKETS (IF NEEDED)
LUMEN FOCUS FFR 1X8 KIT INSTALL INSTRUCTIONS
REMOVAL PROCESS
FIXTURE IN CEILING GRID
WARNING - RISK OF FIRE OR ELECTRIC SHOCK.
INSTALL THIS KIT ONLY IN LUMINAIRES THAT HAVE
THE CONSTRUCTION FEATURES AND / OR DRAWINGS
AND WHERE THE IMPUT RATING OF THE REROFIT KIT
DOES NOT EXCEED THE INPUT RATING OF THE LUMINAIRE.
WARNING - TO PREVENT WIRING DAMAGE OR ABRASION,
DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR
OTHER SHARP OBJECTS.
WARNING - RISK OF FIRE OR ELECTRIC SHOCK, LUMINAIRE
WIRING AND ELECTRICAL PARTS MAY BE DAMAGED WHEN
DRILLING FOR INSTALLATION OF LED RETROFIT KIT.
CHECK FOR ENCLOSED WIRING AND COMPONENTS.
CAUTION: UNLESS OTHERWISE INDICATED, DO NOT
MAKE OR ALTER ANY OPENINGS IN THE COMPARTMENT
OF WIRING OR ELECTRICAL DURING INSTALLATION OF THIS
RETROFIT ASSEMBLY. PLUG ALL UNUSED OPENINGS IN THE
COMPARTMENT OF WIRING OR ELECTRICAL COMPONENTS.
WARNING - RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL
INJURY. BEFORE INSTALLATION TURN POWER OFF.
WARNING - RISK OF FIRE OR ELECTRIC SHOCK, LED RETROFIT
KIT INSTALLATION REQUIRES KNOWLEDGE OF LUMINAIRES
ELECTRICAL SYSTEMS. IF NOT QUALIFIED DO NOT ATTEMPT
INSTALLATION. CONTACT A QULIFIED ELECTRICIAN.
CAUTION: THE INSTALLATION AND SERVICING OF THIS PRODUCT SHOULD BE PREFORMED BY A QUALIFIED ELECTRICIAN OR SERVICE PERSONNEL
1X8 KIT SHOWN
"DO NOT MAKE OR ALTER ANY OPEN HOLES IN AN ENCLOSURE
OF WIRING OR ELECTRICAL COMPONENTS DURING KIT INSTALLATION.
PAGE 1 OF 3
