background image

Care Instructions - 

Read Before Installation

- This box contains fragile and valuable goods that 
have been carefully packed. Please take utmost care 
in unpacking the parcel as damage can occur in this 
process.
- Please be sure you have received the correct 
number of boxes i.e. 1 of 2, 2 of 2 etc.
- Under no circumstances should the product be 
lifted out by the neck or light fitting.
- If you have received any damaged goods or are 
missing any part of your order, please contact our 
sales office as soon as possible

Recycling

- Recyclable packaging used, please consult with 
your local recycling centre for further information.
- Waste electrical products should not be disposed 
of with conventional household waste. Please 
recycle all parts when possible.

Cleaning Instructions

Brass 

- all types:  Use a soft dry lint free cloth

Bronze, Nickel, Silver & Chrome: 

Use a dry cloth 

only, no chemical cleaners

Glass: 

We recommend using a strong alcohol such as 

isopropyl alcohol. Note: some modern cleaning 
solutions can contain chemicals that can leave a 
greasy film on glass.

Gilt Wood: 

Use a dry cloth only

Ceramic:

 Use a damp cloth only

Wood: 

Wax polish i.e. Antique wax

Alabaster:

 Dust with a soft brush or a clean dry cloth. 

Avoid water or water-based cleaners. Any marks that 
cannot be removed by dusting must be cleaned by a 
specialist.

Lacquered Furniture: 

Furniture polish

Crystal: 

Damp cloth

Card/Laminated Shades: 

Use a Feather duster only

Silk Shades: 

Gently tap to lift dust

Needlework:

 Dry-clean

-Any decorative parts made from other materials 
must be removed and cleaned separately to avoid 
damage - e.g. alabaster. 

After choosing a suitable location that meets all the requirements of 

the safety information install the unit following the steps overleaf.

 

- Carefully unpack all parts and check for damage or missing parts 

before commencing installation.

- Installation of this product must be carried out by a qualified electrical 

contractor.

- Shut off power at the fuse box or circuit breaker box.

- If necessary, remove old fixture and all mounting hardware from the 

junction box.

-Be sure to follow the steps in the order given.

- The supply wires must be rated for at least 90°C

-This product must be installed in accordance with all applicable 

installation codes by a person familiar with the construction and operation of the product and the hazards 

involved.

- Ensure that the support for the luminaire is of sufficient structural strength and that any fixing screws do not 

interfere with the connecting cables.

- The light must be mounted on a non-flammable surface as a fixed luminaire, and is not suitable for portable 

use.

- The unit can get very hot during use. Ensure the unit has cooled before handling.

- Ensure adequate ventilation space is allowed between the unit and any object above, in front or to either 

side of the unit. Suggested minimum space is 19½” above and 19½” on all sides.

- To prevent tarnishing, it is advisable to wear gloves at all times when handling the product.

Safety Information  - Read Before Installation

VAUGHAN 

Installation Guide 

www.vaughandesigns.com

Denmead Lantern

WA0346

Summary of Contents for Denmead WA0346

Page 1: ...tly tap to lift dust Needlework Dry clean Any decorative parts made from other materials must be removed and cleaned separately to avoid damage e g alabaster After choosing a suitable location that meets all the requirements of the safety information install the unit following the steps overleaf Carefully unpack all parts and check for damage or missing parts before commencing installation Install...

Page 2: ...de la boîte de jonction Veillez à suivre les étapes dans l ordre indiqué Les fils d alimentation doivent être prévus pour une température minimale de 90 C Ce produit doit être installé conformément à tous les codes d installation applicables par une personne qui connaît bien la construction et le fonctionnement du produit ainsi que les risques encourus Assurez vous que le support de la lampe est s...

Page 3: ...the product is secured to the wall 4 Position the product onto the wall by lining up the product s location holes to that of the mounting screws 8 When the bulb has been replaced replace the gasket and the glass cap ensuring the cap is secured tightly NOTE The cap must be tightly secured failure to secure the cap will result in water ingress and risk of electrical shock 7 To replace the bulb unscr...

Page 4: ...ñol 1 Messen Sie den Abstand zwischen den Befestigungsschlüs sellöchern und den Kabelausgangslöchern des Produkts 2 Messen und markieren Sie die Wandmarkierungen vor der Montage Positionieren Sie die Schraublöcher an einem geeigneten Ort rund um die Dose Schrauben Sie geeignete Befestigungen an die zwei oberen Befestigungsstellen 3 Nach Identifikation der Hausstromverkabelung verbinden Sie die Geb...

Reviews: