www.kenall.com | P: 800-4-Kenall | F: 262-891-9701 | 10200 55th Street Kenosha, Wisconsin 53144, USA
This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin. It may be covered by patents
found at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. ©2019 Kenall Mfg.Co.
1
INSTALLATION INSTRUCTIONS
TPD23_F-4937_091118
IMPORTANT SAFEGUARDS
When using electrical equipment, basic safety precautions
should always be followed, including the following:
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE
APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH
THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND
THE HAZARDS INVOLVED. DISCONNECT POWER TO ALL CIRCUITS
BEFORE WIRING FIXTURE. INSTALL IN ACCORDANCE WITH
ALL NATIONAL, STATE, AND LOCAL CODES. DO NOT CONNECT
TO AN UNGROUNDED SUPPLY. READ ALL FIXTURE MARKINGS
AND LABELS TO ENSURE CORRECT INSTALLATION OF FIXTURE.
SUPPLEMENTAL INSTRUCTIONS MAY BE LOCATED ON THE
FIXTURE, IN ADDITION TO THIS INSTRUCTION SHEET, REGARDING
ORIENTATION, OR MOUNTING RESTRICTIONS.
SAVE THESE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
TPD SERIES
Luminaires for Parking Garages & Surface Lots
TOPDEK
™
LED
Square Pole Adapter Plate
The adapter plate ships with every unit
and enables TopDek to be used in square
pole installations.
Square Pole Adapter
Drilling Template
ROUND POLE MOUNTING
SQUARE POLE MOUNTING
23.00
7.70
32.00
6.10
3.20
20.50
18.50
Ø.438
1.8125
(2)
Ø.875
1.50
3.00
6.00
.875
3.00
Ø
Ø
.438 (2)
1.50
3.00
DRILL HOLES REQUIRED ON
POLE FOR MOUNTING.
Round Pole 'Ready'
TopDek ships ready for round pole
installations.
