6.2.
WIRING DIAGRAM
ig.5
6.3.
EXTRAORDINARY MAINTENANCE
The operator must not dismantle any part of the machine. If an extraordinary maintenance is necessary, you
should call the Sammic.
6.4.
DISMANTLING
MACHINE DEACTIVATION
Once the machine has reached the end of it technical and working life, it must be deactivated. The putting out of service
on condition that it can be no longer used for the aims, to which it was projected and built, it can not in any case
forbidden the reuse of raw materials, with which the machine is built.
Deactivation process:
•
Switch the machine off according to the indication described in chapter 4 "Machine use".
•
Pull out the machine plug from the mains.
•
Keep nippers and cut the electric cable near the connection of machine entry.
•
Block the tray holder drawer on the front by ting it up with adhesive tape.
The machine doesn't contain dangerous components or substances that require particular removal procedures. After
having dismantled the machine. It is necessary to dismantle the machine in accordance to what is required by the
regulations of the Country in which the machine has been disposed of.
EN
-
27
-
