DEC UK 578129130
1
Sames
Siège Social / Headquarter: 13, chemin de Malacher - CS70086 - 38243 Meylan Cedex - France - Tél / Phone: +33 (0)4 76 41 60 60
SAS au capital de 12.720.000 euros | RCS Grenoble: 572 051 688 | Code APE: 2829B | TVA intracom: FR36 572051688
UK DECLARATION OF CONFORMITY
(1)
The manufacturer herewith declares that the equipment is in conformity with the UK statutory requirements.
(2)
Equipment type
RÉCHAUFFEUR / PAINT HEATER
MAGMA 500 ID9 / MAGMA 500 ID14 HV
(3)
Applicable Directives
2016 No. 1107
(4)
Marking
Réchauffeur / Paint Heater
II 2G Ex db IIB T4 Gb
(5)
Designated
standards
EN 60079-0 : 2018
EN 60079-1 : 2014
(6)
Conformity
assessment
procedures
Module A Documentation technique (Annexe VIII) / Conformity
assessment procedure: Module A Technical documentation
(ANNEX VIII)
Special conditions for safe use:
Connection to external circuits shall be established by suitable temperature resistant
wiring and cable glands. Loose leads connected inside hazardous location shall be
protected by suitable type of protection. All unused openings shall be closed by
certified blind plugs.
A repair of flameproof joints is only allowed according to manufacturer’s requirements.
A repair according to the values of table 2 and 3 of EN 60079-1 is not allowed.
The used cable gland and the cable must have a minimum operating temperature of
+80°C. Alternative cable glands and cables can be used.
(7)
Approved body
CML 2503 - Ellesmere Port - United Kingdom
UK Type examination certificate :
CML 22UKEX1262X Issue 0
Refers to :
UE Type examination certificate :
EPS 18 ATEX 1115X Issue 0
UK Quality Assurance Notification :
CML 22UKQAN15825 Issue 0
(8)
This declaration of conformity is issued under the sole responsibility of the manufacturer.
Director of the STAINS site - Executive Management (EM)
Hervé WALTER
Established in Stains, on
