39
7.5
Initialization of the follow-up in production
Identify the gun in the material tracking system.
- Set up a preventive maintenance program if necessary.
Refer to (10.110.1Preventive Maintenance Plan).
7.6
Safety in production
Respect the maximum recommended pressures:
-
6 bar max. in the gun.
-
1 bar max. in the GSP cup.
Do not point the gun at yourself or anyone else while spraying
Use an adapted and ATEX-certified conductive air hose.
8
Use of the FPro G
First commissioning
Refer to paragraph: 7 Commissioning
Summary of Contents for FPro G
