35
7
Commissioning
Intervening staff: qualified personnel.
-
Take into account the safety instructions of the sprayed product.
-
Wear suitable PPE (ear protectors, mask, gloves, goggles, safety
shoes).)
-
Check the correct operation of the pressurized air production
system
-
Verify the proper operation of the air extraction system.
-
Use measuring equipment that is certified, monitored and
complies with ATEX regulations.
-
Do not immerse the gun in solvents or aggressive products.
-
Do not clean or immerse the GSP kit in solvents or aggressive
media.
-
Do not clean with wire brushes.
-
Use only antistatic wipes for cleaning the equipment.
-
Use only genuine SAMES KREMLIN spare parts and accessories.
Summary of Contents for FPro G
