64
10.4.6
Replace the GSP kit
Objectives
Procedure to be carried out within the framework of maintenance.
Intervening staff
Qualified personnel.
Prerequisite
The GSP regulator kit must not be cleaned with solvents or immersed in
solvents.
-
Do not pull the trigger and open the cup lid at the same time.
-
Maximum allowable pressure in the GSP cup: 1 bar / 14 psi.
-
Only use regulator 903 130 605 with this GSP kit.
-
The air needle must be in the "open" position before mounting
or removing it from the gun.
-
Risk of damage to the air needle and/or gun body.
Summary of Contents for FPro G
