13
Surfaces, edges, corners
Some component surfaces may be hot during operation.
Skin contact with hot surfaces will cause severe skin burns.
Handle open or sharp-edged components with care. Wear
protective gloves.
1.2
Integrity of the material
Equipment modification
Under no circumstances should our equipment be modified or used in
unintended cases of use.
Parts and accessories must be exclusively supplied or approved by
SAMES KREMLIN.
SAMES KREMLIN cannot be held responsible for personal injury as well
as breakdowns and/or damage resulting from modification of the
equipment. Any modification of the equipment made by the user and
not authorized by SAMES KREMLIN will result in loss of certification.
Summary of Contents for FPro G
