SAMCO CP7, Instructions Manual

Page: 43 / 61

43
APPENDIX" A" ENGINEERING INFORMATION
A. CASING AND IMPELLER DATA:
CASING DESIGN DATA - Dimensions In Inches - mm
Flange
ANSI Minimum
Bolt
Pump Frame Std. EE Wall
Size Group (Lbs) Thickness inch/mm No. Size inch/mm
1,5 x 1 x 6 5/16 – 7.9 8 3/8 / M10
3 x 1.5 x 6 5/16 – 7.9 8 3/8 / M10
3 x 2 x 6 5/16 – 7.9 8 3/8 / M10
4 x 3 x 6 F4Gl 150 3/8 – 9.5 8 3/8 / M10
1.5 x l x 8 3/8 – 9.5 12 1/2 / M12
3 x 1.5 x 8 7/16 – 11.1 12 1/2 / M12
3 x 1.5 x 8.5E 7/16 – 11.1 12 1/2 / M12
3 x 2 x 8.5E 7/16 – 11.1 12 1/2 / M12
4 x 3 x 8.5 7/16 – 11.1 12 1/2 / M12
6 x 4 x 8.5 9/16 – 14.3 12 5/8 / M16
2 x l x l0E 1/2 - 12.7 12 5/8 / M16
2 x l x l0HE 1/2 - 12.7 12 5/8 / M16
3 x 1.5 x l0HE 1/2 - 12.7 12 5/8 / M16
3 x 2 x l0HE 1/2 - 12.7 12 5/8 / M16
6 x 4 x l0 F4Hl 150 1/2 - 12.7 12 5/8 / M16
3 x 1.5 x 11E 1/2 - 12.7 12 5/8 / M16
3 x 2 x 11 1/2 - 12.7 12 5/8 / M16
4 x 3 x 11 1/2 - 12.7 12 5/8 / M16
3 x 1.5x 13E 5/8 – 15.8 16 5/8 / M16
3 x 1.5 x 13HE 5/8 – 15.8 16 5/8 / M16
3 x 2 x 13 5/8 – 15.8 16 5/8 / M16
4 x 3 x 13 5/8 – 15.8 16 5/8 / M16
6 x 4 x 13 1/2 - 12.7 16 5/8 / M16
8 x 6 x 13
1/2 - 12.7
16 5/8 / M16
8 x 6 x 15 F4J1 150
1/2 - 12.7
16 3/4 / M20
10 x 8 x 15H 1/2 - 12.7 16 3/4 / M20
10 x 8 x l5
1/2 - 12.7
16 3/4 / M20
Casing taps are not desirable for corrosive service and only discharge by-pass tap for flushing stuffing
box is drilled as standard.