Operator’s manual
Twin-rotor rotary rake
Z2-780; Z2-840
- 5 -
NOTE:
Optional extra equipment should be ordered separately.
Tab. 2.
Recommended PTO shafts for Z2 rotary rakes
Model
Power Length
Torque
Symbol
Joint/ clutch
Manufacturer
Notes
HP
mm
Nm
Z2-780
Z2-840
55
710-1058
716
7G7R071CE007WR7A
Wide-angle /
overrunning
Bondioli &
Pavesi
PTO shafts of other brands with equivalent parameters could be used after first obtaining SaMASZ
permission.
NOTE:
Lubricate the PTO shaft with high quality multi-purpose grease every 50 shaft operating
hours. If access holes are available, lubricate fittings through access holes. See label on
guard if applicable (
Fig. 3
).
Fig. 3.
PTO shaft lubrication points. Mounting directions
4.
SAFETY PRECAUTIONS
The following precautions are for your safety. They must be read carefully and
followed by every person who operates or maintains the machine. Failure to follow these safety
precautions could result in serious injury or death to the operator, maintenance person or
bystanders and property damage to the machine and surrounding property.
Safety Signal Words
This manual and the safety labels attached to this equipment utilize signal words that signify
safety hazards with different levels of severity. Below are the words used and the definitions for
these words:
•
DANGER
indicates a hazardous situation which, if not avoided, will result in death
or serious injury
•
WARNING
indicates a hazardous situation which, if not avoided, could result in
death or serious injury
•
CAUTION
indicates a hazardous situation which, if not avoided, could result in
minor or moderate injury
•
NOTICE
is used to address practices not related to physical injury.
PTO shaft’s end with
wide angle joint
clutch – To be mounted
on the rake’s side.
PTO shaft’s end
without clutch – To be
mounted on tractor’s
side.