Operator’s manual
Twin-rotor rotary rake
Z2-780; Z2-840
- 32 -
9.
DISASSEMBLY AND WITHDRAWAL FROM USE
9.1. Repair
CAUTION:
Prior to commencing repair works the machine should be disconnected from
the tractor.
Prior to approaching any repair or service works clean the machine thoroughly and remove
any possible grass, dirt or mud remaining after raking.
Upon inspecting any bolt connections and pins for clearance, assess whether the machine is in
proper operating condition. Replace any worn or damaged bolts, pegs, pins and other parts with
new ones.
The following operations are to be made once the machine is repaired:
make sure that all elements are installed properly,
install the dismounted guards,
check whether screws and nuts are tightened,
once all the guards are installed, perform a warm-up start in order to make sure the repaired
machine operates properly.
9.2. Demontage and withdrawal from use
If the rake cannot be repaired anymore, it should be withdrawn from use. For this purpose oil from
intersecting axis gears should be drained and delivered to a proper waste treatment company. Clean
rake’s parts, dismantle and dispose properly of all plastic parts.
After that, the rake could be sold to breaker’s yard.
CAUTION:
When dismounting the machine pay particular attention to and additional
dangers, as crushing, cutting, wounding, concussion and abrasion. Use proper
tools and personal protective equipment: protective gloves, clothing and
footwear, eye wear, etc. Pay attention so that the machine works efficiently,
and thus it is required to secure the machine with supports.