Operator’s manual
Twin-rotor rotary rake
Z2-780; Z2-840
- 4 -
3.2. Design and working principle
Fig. 2.
Parts of twin-rotor rotary rake
1 – Hitch
2 – Main frame
3 – PTO shaft
4 – Gearbox
5 – Arms
6 – Tines
7 – Safety guard
8 – Tine protections
9 – Tine holders
10 – Adjustment lever
11 – Windrow curtain
12 – Trolley
13 – Support leg
The hitch (
1
) enables attachment of the rake to tractor’s lower pins. Drive from tractor’s rpm is
transmitted through PTO shaft inside the main frame of the rake (
2
) on an intersecting axis gear and
then by means of shafts (
3
) on rotor gearboxes (
4
). On a rotor arms (
5
) are mounted, with tines (
6
)
attached. On the arms there are safety guards (
7
). During transport outside arms are taken off and
placed inside the holders (
9
); put the tine protections (
8
). Adjustment levers (
10
) are used to
regulate the height of raking. The rake is equipped with a curtain (
11
), which formulates a windrow.
Under the rotor gearboxes rake trolleys (
12
) are mounted.
3.3. Standard equipment and spare parts
The rakes are sold with the following standard equipment:
warranty card,
operator’s manual with spare parts list and Declaration of Conformity,
PTO shaft,
warning plates with LED lights,
working width adjustment (mechanical in
Z2-780,
hydraulic in
Z2-840
),
spray paint (150 ml).
Additional equipment:
hydraulic windrow width regulation (in
Z2-780
),
spare wheels with attachment.
10
13
4
5
6
7
1
2
3
11
12
9
8