Operator’s manual
Twin-rotor rotary rake
Z2-780; Z2-840
- 34 -
11.
WARRANTY CARD
TWIN- ROTOR ROTARY RAKE
The product quality has been checked and meets the required standards and regulations and is
permitted for use.
NOTE:
A warranty card without the required information or with corrected or illegible
information –
is invalid.
12.
WARRANTY TERMS
12.1. Warranty claims procedures
1.
The manufacturer guarantees its products against faults in materials or production.
2.
Warranty period is for two years from the date of sale to the purchaser, stated above.
3.
Any repair which is subject to warranty should be carried out by an authorised SaMASZ dealer.
Upon completion of the repair, the dealer must submit a warranty claim within 14 days.
4.
Warranty claims regarding replacing of the product are considered if received within 14 days
after it is completed by the manufacturer.
5.
The following parts and situations are not covered by warranty:
a)
wearing parts: rotors, intersecting axis gears and parts inside the gearboxes, bushings
and sliding elements, clutches, joints, tine holders, raking tines, bearings, safety
curtains, swath guides rubbers, connective elements, etc.
These repairs may be done only at purchaser’s cost.
b)
use for any other purpose than those described in the operator’s manual,
c)
operation on rocky fields and results such as: damaging and bending of tines
d)
running into any obstacle,
e)
too fast lowering of the machine to the ground,
f)
setting raking tines lower than 0.39” above the ground,
g)
bending or breaking transmission connecting rod,
h)
using PTO shaft featuring parameters other than provided by the shaft's
manufacturer, or length not adjusted to operating tractor,
i)
transport and accidental damage.
Serial number
Date of manufacture
Manufacturer’s stamp
QC signature
Date of purchase
Dealer’s stamp
Dealer’s signature