Salora HDD-2510, Instruction Manual, Page: 139 / 232

24
Segment
This option brings up the Segmentation screen. You can navigate through the recording and mark a
location for the beginning of a segment followed by a location for the end of a segment. The segments will
not be visible when the title is played back. Furthermore, the segments will not be copied to DVD, if the
segmented title is selected for copying. If you re-enter the segment screen for the same title, you can see
the defined segments. See the following illustration.
When you enter the Segmentation screen, the title will start playback automatically. You can use the
playback navigation keys to move anywhere in the title and choose a point for segmentation.
The following remote control keys are supported:
Enter Marks the Start/End points Defines your segments
Display Toggles between:
Progress Bar -> Add Helper Text
(add dynamic markers) -> Add
Title Info (Top) ->No Cross-Fade
Return Back to the Title list Menu If all segments are chosen
correctly (i.e. there is a
corresponding Segment End for
each Segment Begin) the result
should be saved before going to
the HDD title list.
Otherwise all your changes will
be lost.
Clear Deletes all Start and End points. If all segments are chosen
correctly i.e. there is a
corresponding Segment End for
each Segment Start
Play Navigation in the Title All playback modes (FF, FB, etc)
Stop Back to title list menu. Discards all actions
Functions Back to HDD title list Leaves the menu without saving
Note: The segmentation screen can only be accessed if the title you want to split is not protected or locked. The
accuracy of the segment points lies within 0.5 seconds.
Changing the Index Picture
This option brings up the Change Index Picture screen. You can navigate through the recording (similar to
Playback screen) to find a suitable picture. When the desired picture is displayed on the screen, press Enter to
change the Index picture.
Note: This operation is only available if the title is not protected or locked
HDD Editing