17
One-Touch-Recording (OTR)
This function enables you to set up the timer during the recording process. Every time you press the
OTR button
,
the timer advances 30 minutes. Once the scheduled time is reached, the system will stop recording automatically.
Usage:
Enter the Recording Mode and start recording by pressing
Rec/OTR
.
Press the REC/OTR button once or several times to set a suitable recording time. The recording time will increase
by 30 minutes with every press on the
REC/OTR button
. A maximum of 150 minutes is possible.
If the scheduled time exceeds the maximum recording time on the disc, the recorder resumes the normal recording
mode and stops once the end of the disc is reached.
If the timer recording is paused or stopped, the recording process is aborted.
Digital Video (DV) Interface-Controlled Recording
1.
Your
PLAYER
supports real-time monitoring and recording for a DV through the IEEE 1394 serial port
(DV).
Connect the DV to the unit (for details, see System Connection: System Connection for Recording
External Signals) at the front panel inputs.
Turn on the connected DV device and set it to the camera mode. Then press the REC/OTR button on your
remote control to start recording. (Other operations are the same as in the Recording Mode)
.
2.
This unit can also copy recorded contents of your DV device.
The connection method is the same as mentioned above. Switch on your DV device and enter the
playback mode. The playback status should be at stop at this moment.
You can now use the remote controller of your DV device to complete necessary operations: STOP,
PLAY, PAUSE, FB, FF, etc.
Press the
REC/OTR button
and then press the
PLAY button
to start recording.
During the recording process, press the
PAUSE button
to suspend recording. To resume playback on the
DV, simply press the
PLAY button
. If you press the
REC/OTR button
, the playback on the DV and the
recording of the recorder start at the same time. Pause recording and press the
FWD, REV buttons
to
complete forward or rewind operation for the DV. If you press the STOP button, recording will stop first.
Press again to stop playback on the DV device.
Note:
Do not disconnect the unit or switch off the power during the recording process. The finalized DVD disc will
not be usable in such a case. Be sure to switch off the power of both recorder and DV device before disconnecting
the DV cables.
Recording Mode
Summary of Contents for HDD-2510
Page 1: ...HDD 2510 250GB HDD GEBRUIKSAANWIJZING DVD SPELER HDD DVD RECORDER...
Page 59: ...HDD 2510 250GB HDD MANUEL D UTILISATION LECTEUR DVD ENREGISTREUR HDD DVD...
Page 116: ...HDD 2510 250GB HDD OPERATING INSTRUCTIONS DVD PLAYER HDD DVD RECORDER...
Page 174: ...BEDIENUNGSANLEITUNG HDD2510 HDD DVD RECORDER...