Salora HDD-2510, Instruction Manual

Page: 127 / 232

12
Note:
B e f o r e y o u c o n n e c t t h e P L A Y E R t o a n o t h e r d e v i c e d i s c o n n e c t t h e P L A Y E R a n d a l l o t h e r
d e v i c e s f r o m t h e p o w e r s o u r c e !
Connection to a television
The DVD recorder provides three kinds of video outputs: component video, S-Video, and composite video.
You can select one of the available video outputs of your television and then connect it according to the diagram.
In terms of picture quality, component video is the best. S-Video comes next, while composite video provides the
lowest quality.
Audio data is transmitted separately. When connecting the audio output of the
P L A Y E R to your television,
connect the left and right audio lines to the TV Audio inputs of the same group of sockets as the connected video
input or connect your audio a stereo.
There is a scart output on the unit. You can use a scart cable to connect it to your television. A composite video
(CVBS), a component video (RGB) and audio (L & R) outputs are built in the scart output. When the scart output is
used, none of the above mentioned cables is needed for a connection.
System Connections
Rear Panel DVD-R307
Scart Input
Scart Output