Salora HDD-2510, Instruction Manual, Page: 135 / 232

20
.
7. Set up the starting time of recording : Change to the time row with the UP / DOWN buttons and press ENTER .
Enter the time in HH/MM format using the Number buttons . Confirm with ENTER . You cannot input an invalid
date. If the value at the field you try to enter is incorrect, there will be no reaction at the press of the button.
8.
Set up the end time of recording: The operation here is similar to Step 7. Enter a value between 0:00 and
23:59 with the number buttons and press the ENTER button to confirm. When the end time is reached, the
recording process will be stopped and the
PLAYER enters the standby mode.
9
. Recording source : you may choose either HDD or Optical Disc as recording source.
Use the UP / DOWN buttons, highlight the title row and press ENTER .
10
. Choose a title: Use the UP/DOWN buttons to highlight the title row and press ENTER . A yellow marker
appears which can be moved using the Arrow buttons. Use the UP / DOWN buttons to change the letter, press the
ENTER button to enter it. You can choose from letters, numbers, and space. Both capital letters and small letters
are available. Using LEFT / RIGHT changes the input field. After setting your title, confirm it by pressing ENTER .
Your recording will be saved under the title of your choice.
11.
After entering all recording parameters, use the ARROW buttons change to the OK field and press ENTER .
Your settings have now been saved and are visible in the chart. Use the CANCEL field to discard these settings.
12.
Press the TIMER button to exit the timer recording setup menu.
13
. To ensure the PLAYER can record pre-programmed shows, it has to be switched on or set into standby mode.
Do not switch it off or run other programs.
14
.
If you perform other operations, the PLAYER will display a warning message five minutes before the program
starts. A dialogue box is displayed which asks you to confirm or discard the recording. If there is no reaction to this
message, the PLAYER will start the recording at the given time.
15.
If the PLAYER is in standby mode, it will switch on three minutes before recording and starts recording at the
programmed time.
16.
The PLAYER will return to the previous state after finishing the recording (On or Standby).
Note:
♦
The recording settings have to be accurate to ensure the PLAYER records correctly.
♦
You can delete a programmed setting by highlighting the relevant entry in the timer menu and followed by
pressing the ADD / CLEAR button.
♦
You cannot do recordings on DVD+R optical discs that are already finalized.
Timer Recording