Salicru CV50-008-4F, User Manual, Page: 51 / 144

Function Parameters 51 - 144
Function
code
Name Detailed instruction of parameters
Default
value
Modify
P05.07
S7 terminal
function
selection
18: Multi-step speed terminal 3
19: Multi- step speed terminal 4
20: Multi- step speed pause
21: ACC/DEC time option 1
22: ACC/DEC time option 2
23: Simple PLC stop reset
24: Simple PLC pause
25: PID control pause
26: Traverse Pause (stop at the current frequency)
27: Traverse reset (return to the center frequency)
28: Counter reset
29: Torque control prohibition
30: ACC/DEC prohibition
31: Counter trigger
32: Length reset
33: Cancel the frequency change setting temporarily
34: DC brake
36: Shift the command to the keypad
37: Shift the command to the terminals
38: Shift the command to the communication
39: Pre-exciting command
40: Clear the power
41: Keep the power
61: PID pole switching
0
◎
P05.08
S8 terminal
function
selection
0 ◎
P05.09
HDI terminal
function
selection
0
◎
P05.10
Polarity
selection of the
input terminals
The function code is used to set the polarity of the input
terminals.
Set the bit to 0: the input terminal is anode.
Set the bit to 1: the input terminal is cathode.
BIT0 BIT1 BIT2 BIT3 BIT4
S1 S2 S3 S4 S5
BIT5 BIT6 BIT7 BIT8
S6 S7 S8 HDI
Setting range: 0x000~0x1FF
0x000 ○
P05.11 Switch filter time
Set the sample filter time of S1~S8 and HDI terminals. If the
interference is strong, increase the parameter to avoid the
disoperation.
0.000~1.000s
0.010 s
○
P05.12
Virtual terminals
setting
0x000~0x1FF (0: Disabled, 1:Enabled )
BIT0: S1 virtual terminal
BIT1: S2 virtual terminal
BIT2: S3 virtual terminal
BIT3: S4 virtual terminal
BIT4: S5 virtual terminal
BIT5: S6 virtual terminal
0x000 ◎