Sakai SW884, Operator'S Manual

Page: 71 / 127

2 OPERATION
– 66 – – 67 –
4) Select l position of the Timer switch for intermittent spray.
position : Spray timer is activated
position : Spray timer is shut off
5) Adjust spray time and pause time.
Spray time is adjustable between 0 – 20 seconds using
the SPRAY dial and pause time is adjustable between
0 – 60 seconds with PAUSE dial as desired.
Adjust according to the job site conditions.
6) To start spraying.
When AUTO position is selected, placing the F-N-R
lever in the Forward or Reverse position causes travel
and sprinkling to start simultaneously.
NOTE: The water can not be controlled by the Spray switch.
When position is selected, press the Spray switch
(blue button) and hold for at least one second and the
system will start spraying. The spray lamp will illuminate.
Pressing and holding the Spray switch (blue button) for at least one second while the system
is spraying will cause the sprinkling to stop.
The spray indicator lamp will turn off.
WARNING
Pay careful attention to your surroundings and maintain control of the machine
when changing switch positions. Whenever possible, stop the machine to change
switch settings before continuing operation.
IMPORTANT
When starting asphalt compaction, place the Spray mode selector switch in the
position and moisten the drum surface completely before selecting TIMER spray.
For resuming work after a short break, follow the same procedure.
SPRAY dial PAUSE dial
Timer switch
TIMER
SPRAY PAUSE
(SEC)
Ⓝ
Neutral
Ⓡ
Ⓕ
Reverse
Forward
Spray switch
(Blue button)