Sakai SW884, Operator'S Manual

Page: 61 / 127

2 OPERATION
– 56 – – 57 –
2.3.7 Stopping the engine
1) Set the Engine speed selector switch at the IDLE
position, wait for about 5 minutes with the engine idling
to gradually cool the engine.
IMPORTANT
• Do not bring a hot engine to a sudden stop except for an emergency. This will
shorten the life of its component parts.
• Do not also allow an overheated engine to come to a sudden stop, but run it at
middle idling speed for gradual cooling down.
2) Turn the Starter switch key to the position to stop
the engine.
CAUTION
Do not turn the Starter switch while the
machine is in motion.
3) Remove the Starter switch key.
WARNING
• When dismounting from the machine, apply the brake by pressing the Parking
brake switch. If necessary to park on a grade, chock the wheels to prevent
unexpected moving down the grade.
• Never fail to remove the Starter switch key.
2.3.8 Check after stopping the engine
1) Perform the walk-around checks for oil and water leakage, abnormal signs around the
drums.
2) Fill the fuel tank.
3) Remove waste paper if any from the engine compartment, as this will pose a possible fire
hazard.
4) Scrape mud or other materials from and around the drums.
5) When transporting the machines, please ensure safety by strictly complying with the
applicable laws and regulations.
Engine speed selector switch
ECO
IDLE
FULL
START
ON
OFF