Sakai SW884, Operator'S Manual

Page: 64 / 127

2 OPERATION
– 60 –
8) To generate vibration.
When the AUTO mode is enabled as described in Step
2 above, placing the F-N-R lever in the Forward or
Reverse positions will cause the vibration to engage
automatically when the machine starts in motion.
NOTE: Vibration can not be controlled by the Vibration
switch on the F-N-R lever in AUTO mode.
When position is selected in Step 2, press and hold the Vibration switch (green button)
for at least one second to start vibration. The vibration indicator lamp on the F-N-R lever
will illuminate.
To shut off vibration, press and hold the Vibration switch (green button) on the F-N-R
lever for at least one second. The vibration indicator lamp will shut off when no vibration is
occurring.
WARNING
Pay careful attention to your surroundings and maintain control of the machine
when changing switch positions. Whenever possible, stop the machine to change
switch settings before continuing operation.
CAUTION
• Keep the vibrator shut off when the machine is not rolling.
• Stop vibration if the machine has encountered a running difficulty, for example,
when it gets stuck in the mud.
Ⓝ
Neutral
Ⓡ
Ⓕ
Reverse
Forward
Vibration switch
(Green button)