Sakai SW884, Operator'S Manual

Page: 72 / 127

2 OPERATION
– 68 –
To drain water
1) Take off the caps of water tanks.
2) Take off the drain caps
ⓐ
of water tanks and drain water from the tanks completely.
3) Open drain cocks
ⓑ
of spray bars at front and rear, to drain water completely.
4) Turn the lever of water tank selector valve
ⓒ
clockwise, open the drain cocks
ⓓ
of water
pumps.
Take off the bowl
ⓔ
from water filters then throw away water in the bowl then put the bowl
back on the water filters.
5) Run the water pumps approximately 30 seconds with the drain cocks open.
6) Make sure water is completely drained from all hoses, water pumps and spray nozzles.
CAUTION
• To avoid freezing, fully drain the water tank, pipes and filters in cold weather.
• Pay attention to the water level because turning the pump with an empty water
tank will damage the pumps.
Water pump drain cocks
ⓓ
ⓐ
ⓑ
ⓒ
Spray bars and drain cocks
ⓑ
ⓔ
Spray bars and
drain cocks ⓑ
Water tank drain cap
ⓐ
Water tank cap
Water tank selector valve
ⓒ
/ Water filter
ⓔ
Water pump drain cocks ⓓ
Water tank drain cap ⓐ
Water tank selector valve
ⓒ
/ Water filter
ⓔ
Water tank cap
ⓓ