Sakai SW884, Operator'S Manual

Page: 38 / 127

2 OPERATION
– 34 –
Vibration mode selector switch
position : Vibration can be controlled by the
Vibration switch on the F-N-R lever
position : Vibration is shut off
AUTO position : Vibration automatically engages when
the F-N-R lever is moved into the forward
or reverse
NOTE: For vibratory compaction, the Engine speed selector switch must be in the ECO or
FULL position.
The vibrator indicator lamp stays lit at all times when the machine is running in vibratory
mode.
IMPORTANT
• Do not operate the vibrator on a hard area such as cement concrete pavement
surface or the ground covered by thick steel sheets.
• Turn the vibrator off when the machine is at rest.
• Shut off the vibrator immediately if the machine gets stuck in the mud during
vibratory operation.
Vibration drum selector switch
position : Only the front drum will vibrate
position : Both drums will vibrate
position : Only the rear drum will vibrate
Vibration amplitude selector switch (For SW884, SW994)
position : Low amplitude vibration
position : High amplitude vibration
NOTE: Selection is applied only when the F-N-R lever is
in the neutral position.
AUTO
F R
F R
F R
F R
F R
F R