Sakai SW884, Operator'S Manual

Page: 54 / 127

2 OPERATION
– 50 –
2.3.3 After starting the engine
Try not to move the machine immediately after starting but practice the following:
IMPORTANT
Avoid increasing the engine speed abruptly before warming-up run is completed.
1) Run the engine at idling for about 5 minutes to warm it up. Warming-up run allows the
lubricating oil to reach the vital parts of the engine and hydraulic system, gradually warm
the engine, engine oil and hydraulic oil to prepare the machine for driving.
2) After the warm-up operation, check that:
• Temperature gauge ............................ Pointer falls near the center zone
• Fuel gauge .......................................... Pointer falls between the E and F marks
• Charge lamp ....................................... Has gone off
• Engine oil pressure warning lamp ....... Has gone off
• Engine check lamp ............................. Has gone off
3) Check for the color of exhaust gas, listen for unusual sounds and vibration. If abnormal,
determine the cause and correct the problem.
WARNING
Keep staying at the driver’s seat while starting the engine.
2.3.4 Traveling
WARNING
• When starting, operate the horn after securing the safety around the machine.
• Be sure to wear the seatbelt during operation.
CAUTION
While traveling, do not turn the Starter switch .