Sakai SV400D-2, Shop Manual

Page: 149 / 218

8-001
INSPECTION AND ADJUSTMENT
1. INSPECTION AND ADJUSTMENT
1-1. Inspection and Adjustment
1-1-1. Safety precautions for inspection and adjustment
WARNING
Unexpected vehicle movement may cause a serious accident. When inspecting the machine
while the engine is running, always follow the instructions below.
Park the machine on level, flat ground.
Apply the parking brake.
Set a stopper in front and behind each drum or tire.
Make sure that service personnel are given the appropriate information at the appropriate
time.
Make sure that no one can enter any hazardous area.
CAUTION
Do not work on the hydraulic system while the engine is running and the system is hot and
under pressure. Do not disconnect hydraulic hoses or fittings until the system has cooled
and pressure has been properly relieved. Before removing any plugs from the pressure
measurement ports, always release any residual pressure from the piping and open the cap of
the fluid tank to release and pressure.
WARNING
Inadvertent starting the engine may cause a serious accident.
When inspecting the engine, make sure to exchange the appropriate cues and hand signal with
the person at the operator station to avoid any accidents.
CAUTION
Before inspecting inside of the engine compartment, always stop the engine.
Contact with the fan, V-belt or exhaust system parts while the engine is running may cause
serious injury.
•
•
•
•
•