Sakai SV400D-2, Shop Manual

Page: 150 / 218

8-002
INSPECTION AND ADJUSTMENT
1-1-2. Preparation for inspection and adjustment
Prepare the necessary measuring instruments. In addition, particularly when measuring pressure
values, make sure to prepare the appropriate hoses, adapters and a plug removal tool for the
pressure reading port.
Make sure that the instruments to be used operate normally.
When handling the instruments, exercise sufficient caution not to drop or apply any impact to
them. Doing so may adversely affect the calibration. Another important point is to inspect the
instruments regularly. An instrument that does not start from the appropriate zero point may give
an inaccurate reading.
1-1-3. Precautions for inspection and adjustment
When performing inspections and adjustments, pay special attention to safety.
For each inspection, always take three measurements for each measurement point. If the
measurements significantly differ, the measurement method may be incorrect. In such a case,
take measurements once again and calculate their average.
1-1-4. Warm-up
Machinery will not exhibit their true performance under the cold condition. Before taking
measurements, always warm up the engine and make sure that the fluid and engine coolant are
warmed to their specified normal operating temperatures.
•
•
•
•
•