Sakai SV400D-2, Shop Manual

Page: 123 / 218

6-019
VIBRATORY DRUM
17) Attach a lifting bolt (M10×1.5) to the vibrator
shaft end. Then slowly lift with a crane. Confirm
that 1 to 3 mm (0.04 to 0.12 in.) of play exists in
the axial direction.
18) U s i n g a c r a n e , l i f t a n d s l o w l y l o w e r t h e
subassembly of the holder (19 and 30), damper
(18) and disc (14).
Total of lifted parts (19, 30, 18 and 14)
: 120 kg (265 lbs.)
19)
Using the sixteen bolts (16) and washers, firmly
secure the holder subassembly to the housing.
Apply a molybdenum-based grease to the spline
surface of the sleeve (7), and attach it to the
spline shaft at the end of the vibrator shaft.
(16) M20×50: 540 N·m (398 lbf·ft)
•
SV400-2-06045
Lift with crane
Shaft must move 1 to 3 mm
SV400-2-06045
Lift with crane
Shaft must move 1 to 3 mm
SV400-2-06046
Lower with crane
19
18
14
30
SV400-2-06046
Lower with crane
19
18
14
30
SV400-2-06047
16
7
SV400-2-06047
16
7