Sailor UAIS1900 Technical Manual Download Page 60

Page: 60 / 108

UAIS DEBEG 3400, Electronics Unit

ED3047G142 / 08 (2004-06)

Technical Manual

6 Repair/Maintenance

6.3 Software Update

t_ue_e07.fm / 21.06.04

Connection at the PC/Laptop

The serial cable must be
connected to COM 1 of the PC/
Laptop.

Connection at the Electronics Unit

The cable must be connected to the serial service interface of the computer and to the connector on the
top of the Electronics Unit’s pcb.

Fig. 6-8

Service Interface

6.3.4

Software Update by means of a Laptop

Disconnect the Electronics Unit from the power supply for about 5 s.

Connect the power supply and wait about 2 minutes until the Electronics Unit has been restarted.

Connect the update cable before the update software is started.

Download the update from the SAM-CMIS system (see Section 6.3.1), unzip the file and save the
unzipped directory structure to the hard disk or on a CD ROM or use the Update CD-ROM.

Fig. 6-7

Connection to the Laptop

COM 1

z_ue_0

50.

jpg

z_ue_0

51.

jpg

z_ue

_027.

jpg

Service Interface

z_ue

_048.

jpg

z_ue

_049.

jpg

Summary of Contents for UAIS1900













































































































Search results

Summary of Contents for UAIS1900

Reviews:

Related manuals for UAIS1900

Brands by name

Popular brands

Sailor UAIS1900, Technical Manual

Search results

Summary of Contents for UAIS1900

Reviews:

Related manuals for UAIS1900

Brands by name

Popular brands