background image

UAIS DEBEG 3400, Electronics Unit

ED3047G142 / 08 (2004-06)

Technical Manual

2  Overview

2.1  Compatibility with Other Systems

t_ue_e02.fm / 21.06.04

13

2

Overview

The DEBEG 3400 is an AIS Electronics Unit which receives data from other vessels by means of a VHF
radio and sends these data to the radar/navigation system or to a connected Display and Control Unit
(DCU).

In the opposite direction, the AIS receives data from the radar/navigation system and the ship’s sensors
and transmits these data by means of the VHF radio.

Access to these data and access to the VHF radio for a pilot is prepared by means of an additional pilot
port.

The AIS has a long range port to connect a long distance communication system, for instance a satellite
communication system. In this way, the AIS can be called to send the ship’s data. These data are sent
back via the long range port to the questioner.

The UAIS DEBEG 3400 is equipped with a 12 channel GPS receiver and provides position data
according to IEC 61162 Edition 2, so that it is suitable for the use as a position sensor. In areas where
the VTS stations provide differential correction data via VHF link the UAIS DEBEG 3400 switches auto-
matically into DGPS mode.

For further details see Section 4.

2.1

Compatibility with Other Systems

The UAIS DEBEG 3400 can be used in the following systems:

-

AIS with Display and Control Unit (DCU)

-

RADARPILOT/CHARTRADAR 1000

-

NACOS xx-4

-

CHARTPILOT Stand-alone

-

NACOS xx-3 (Radar 9xxx AIS Interface needed for the display of AIS targets at Radar 9xxx indica-
tors and MULTIPILOTs in radar mode)

-

mixed systems consisting of Radar 9xxx and RADARPILOT 1000

-

Radar 9xxx (with Radar 9xxx AIS Interface)

The AIS might not work with SAM Electronics systems/components which are running with older software
versions. For further information, see the Technical Manuals of these systems or the Software Release
Notes.

It is also possible to use the UAIS DEBEG 3400 within systems from other manufacturers which support
the IEC-defined interfaces.

Summary of Contents for UAIS1900













































































































Reviews: