Sailor UAIS1900 Technical Manual Download Page 58

Page: 58 / 108

UAIS DEBEG 3400, Electronics Unit

ED3047G142 / 08 (2004-06)

Technical Manual

6 Repair/Maintenance

6.3 Software Update

t_ue_e07.fm / 21.06.04

6.3.2

Determination of the Current Software Versions

UAIS DEBEG 3400 with RADAR/CHARTRADAR/MULTIOPILOT 1000

Open the System Maintenance Manager by clicking Menu -> Utilities -> Maintenance. Select the
register card Telemonitoring Data and click on the Version button at the lower left.

The software versions of the radar and of connected systems are displayed. Use the scrollbar to
search for the UAIS software versions.

UAIS DEBEG 3400 with RADAR 9x00 and MULTIPILOT 910x (Radar Mode):

Press the Menu button. Select Utilities -> Self Check -> Version.

Use the CANCEL/MORE button to toggle through the pages until the AIS page is reached.

UAIS DEBEG 3400 with MULTIPILOT 910x (ECDIS Mode):

Open the tree structure by clicking the Tree button.

Click on System Maintenance -> Version... to display the software versions of the MULTIPILOT
and all connected systems.

UAIS DEBEG 3400 with DCU 3401:

Press the Menu button and select the submenu Config.

Press the Next button several times until the page with the software versions is displayed.

Software Version of the DCU:

Press the Menu button and select the submenu Config.

Press the Next button several times until the page with the software versions is displayed.

Summary of Contents for UAIS1900













































































































Search results

Summary of Contents for UAIS1900

Reviews:

Related manuals for UAIS1900

Brands by name

Popular brands

Sailor UAIS1900, Technical Manual

Search results

Summary of Contents for UAIS1900

Reviews:

Related manuals for UAIS1900

Brands by name

Popular brands