Sailor UAIS1900 Technical Manual Download Page 67

Page: 67 / 108

UAIS DEBEG 3400, Electronics Unit

ED3047G142 / 08 (2004-06)

Technical Manual

6 Repair/Maintenance

6.6 Exchange of Parts and Testing

t_ue_e07.fm / 21.06.04

Proceed in reverse order to mount the new fan and to close the housing. Take care that the connec-
tors fit together during mounting the upper pcb.

Verify the function of the fan after power on.

Put the enclosed label outside on the housing on a good visible position. Fill in date and time

Verify the proper function of the system, make sure that AIS targets and sensor data will be
displayed on the connected display system.

6.6.4

Antennas

If one of the antennas is defective, it must be exchanged. See the Spare Part List for the order number.

z_u

e_036

jpg

ue_04

Summary of Contents for UAIS1900













































































































Search results

Summary of Contents for UAIS1900

Reviews:

Related manuals for UAIS1900

Brands by name

Popular brands

Sailor UAIS1900, Technical Manual

Search results

Summary of Contents for UAIS1900

Reviews:

Related manuals for UAIS1900

Brands by name

Popular brands