13
3410330_GB
Spare parts and accessories
•
Only use original accessories and/or spare parts. The use of non-original accessories
and/or spare parts will invalidate the manufacturer's warranty and may render the
machine non-compliant with safety standards.
Maintenance intervals
•
Maintenance intervals depend on the actual operating conditions of the machine and the
environmental conditions (presence of dust, humidity, etc.), so no definite time intervals
can be given. However, it is advisable to carry out scrupulous and regular machine
maintenance in order to keep service interruptions to a minimum.
Maintenance, inspections, checks and cleaning
Frequency
Responsible
Routine cleaning
•
General cleaning of the machine and surrounding
area
Daily
Operator
Mechanical protective devices
•
Check the conditions and verify that there are no
deformations, loosening or removals
Every 6 months
Service
Control
•
Check that there are no cracks or deformations,
tightening of screws on the mechanical part:
check the legibility and condition of inscriptions,
stickers and symbols and restore them if
necessary
Annual
Service
Machine structure
•
Tightening of main bolts (screws, fastening
systems, etc.) on machine
Annual
Service
Safety signs
•
Check legibility and conditions of safety signs
Annual
Service
Electrical control panel
•
Check the conditions of the electrical
components installed inside the electrical control
panel. Check the wiring between the electrical
control panel and the machine parts.
Annual
Service
Electrical connection cable
•
Check the conditions of the connection cable
(replace if necessary)
Annual
Service
General overhaul of the machine
•
Check all components, electrical equipment,
corrosion, piping etc.
Every 10 years
(1)
Service
tab 5
(1) - the machine has been built and designed to last for approximately 10 years. After this period (from
commissioning) a general overhaul of the machine should be carried out.
•
It is advisable to enter into a preventive and scheduled maintenance contract with
Customer Service.