75
3410330_GB
UPDATING THE FIRMWARE (SOFTWARE) OF THE ELECTRONIC CIRCUIT BOARDS
Check the firmware version now present on the unit boards.
•
Select SETTINGS.
•
Check the firmware version now present on the unit boards.
UPDATE PROCEDURE
The procedure should only be performed by specialised personnel.
To update the firmware (software) of the circuit boards, it is necessary to have a pen drive
(FAT32 formatting) on which the controller's operating system files are stored (files with the
extension eiml.ucjb and work.ucjb).
Insert the pen drive into the USB port located under the control panel and wait for instructions
from the control panel before removing it.
After removal, switch the machine off and on again.
