Proc Sheet 1 10
myC5-2
REMOVING / REPLACING THE BACK FLIP
COVER
1/2
________________________________________________________________________________________________
Ref. SCT U38 SSC DTS 0024 – Index B - February 15, 2005
Page 5-31
4.62 Tools :
- Cross shaped screwdriver
- Tweezers
4.63 Preliminary operation
1. Remove the battery (
Proc sheet 0 01
).
2. Remove the back cover (
Proc sheet 1 01
).
3. Remove the equipped electronic board (
Proc sheet 1 09
).
4.64 Removal procedure :
1. Press the hinge (2) inside the front cover by means of (curved) tweezers to release the equipped flip (1)
2. Remove delicately the flex PCB (3) from the front cover
3. Remove the equipped flip (1)
4. Remove the front flip cover (
Proc sheet 1 07
).
5. Remove delicately the equipped display from the front flip cover
6. Remove the back flip cover
4.65 Placement procedure :
1. Position the equipped display into the new back flip cover
2. Replace the front flip cover (
Proc sheet 1 07
).
3. Position the equipped flip (1) in its housing by inserting the flex PCB (3) into the front cover
4. Press firmly the hinge (2) with a flat screwdriver, to fix the equipped flip (1) on the front cover
4.66 Further operations :
1. Replace the equipped electronic board (
Proc sheet 1 09
).
2. Replace the back cover (
Proc sheet 1 01
).
3. Replace the battery pack (
Proc sheet 0 01
).
