MF 5461 / MF 5481
- 29 -
6 - Parameters/Setup
Printing the functions guide
51 - PRINT / FUNCTIONS LIST
1
Press on
and enter
51
with the digital keypad.
The printing of the functions guide starts.
Printing the logs
The incoming and outgoing logs list the last 30
transmissions (incoming and outgoing) made by your
machine.
An automatic print out will take place after every 30
transmissions. However, you may request a print out at
any time.
Each log (incoming or outgoing) contains a table with the
following information:
• date and time of the incoming or outgoing document,
• subscriber’s number or E-mail address,
• transmission mode (
Normal
,
Fine
,
SFine
or
Photo
),
• number of pages sent or received,
• call duration,
• incoming or outgoing results: noted
CORRECT
if
properly transmitted,
or
information codes for special calls (polling, manual
subscribers, etc.)
• reason for call error (example: your subscriber does
not answer)
To print the logs:
52 - PRINT / LOGS
1
Press on
and enter
52
with the digital keypad.
The printing of the logs starts.
Print the list of setups
To print the list of setups:
54 - PRINT / SETUP
1
Press on , enter
54
with the digital keypad.
The printing of the list of setups starts.
Font printing
You can print the list of fonts installed on your terminal at
any time.
To print PCL fonts:
57 -
/ PCL FONTS
To print SG Script fonts:
58 -
/
SGSCRIPT FONTS
Lock the machine
This function prevents non-authorized people from
accessing the machine. An access code will be required
every time someone wants to use the device. After each
use, the device will lock automatically.
Before that you have to enter a lock code.
811 - ADVANCED FCT / LOCK / LOCKING CODE
91 - Printer error
timeout
Time-out before document
being printed is deleted
following a print error in PC
print mode.
92 - Printer wait
timeout
Wait time-out for data from PC
before the task is deleted in PC
print.
93 - Replace format
Page format change. This
parameter allows you to print a
LETTER format document on
A4 pages using the LETTER/
A4 setting.
94 - Printer class
Printing in PCL-/Postscript
Mode
Printing in GDI mode
95 Symbol set
This parameter lets you set the
default character set. The
possible values are included
between CS1 and CS30 inclus.
The default value is CS1
(Roman8).
96 - NBR. WEP
Keys
Number of WEP keys allowed
(from 1 to 4).
The printing is not possible on A5 paper
format.
The printing is not possible on A5 paper
format.
Parameter Signification
The incoming and outgoing logs are printed on
the same page.
The printing is not possible on A5 paper
format.
If a code is already registered, enter the old
code before typing the new one.
