MF 5461 / MF 5481
- 28 -
6 - Parameters/Setup
25 - TEL Impedance
This parameter lets you choose
between a complex impedance
and a 600 Ohm impedance,
depending on the telephone
network your terminal is
connected to.
73 - Improve rep @
This parameter lets you
automatically register the
Internet
address of your subscribers fax
during a call (if available).
74 - Erase mailbox
When the fax machine receives
an e-mail with an attachment
and cannot open it, it erases the
message from the ISP MBX,
prints and transmits with a
notice of uncomprehension to
the message sender.
At E-mail reception, the fax
does not destroy the MBX
message, it prints a notice of
uncomprehension asking you to
recuperate this message with
your computer equipment.
This parameter is useful only if
you have PC equipment. The
memory capacity is limited, you
need to empty your MBX or
else new messages may not be
received.
75 - Text Attchmt.
Editing YES / NO and printing
the received Internet
documents.
76 -
Attchmt format
Default format of document
sent on the Internet:
PDF : monochrome or colour
IMAGE : monochrome (TIFF)
or colour (JPEG)
77 - LAN speed
To define the communication
speed of the peripheral units in
relation to the implemented
Local Area Network (LAN).
80 - Toner save
Makes printing lighter to save
toner cartridge ink.
Parameter Signification
81Font number
Starts the printing of the log list.
This parameter lets you set the
default PCL font. The possible
values are included between 5
and 128 inclus. The default
value is 0 (Courier).
82 Form lines
This parameter lets you set the
number of lines per page.
This variable is linked to the
PJL variables: PAPER and
ORIENTATION. If you modify
one of these variables, the Form
Lines variable is automatically
updated (only for the print job
in progress) to respect the same
spacing.
The possible values are
included between 5 and 128
inclus. The default value is 60.
83 Font pitch
This parameter lets you set the
default font spacing, in
characters per inch (the default
font must be of type non-
proportional).
The possible values are
included between 0,44 and
99,99 inclus. The default value
is 10,00.
84 Ptsize
This parameter lets you set the
default font height, in points
(the default font must be of type
proportional).
The possible values are
included between 4,00 and
999,75 (by step of 0,25). The
default value is 12,00.
85 Line termin.
This parameter lets you define
line breaks conversion: <CR>,
<LF> and <FF>.
The possible values are
included between 0 and 3. The
default value is 0.
86 Orientation
This parameter lets you set the
page orientation: portrait or
landscape. The default value is
"portrait".
90 - RAW Port
RAW network print port
connection.
Parameter Signification
