Chapter 13: Digital Operator Monitor Display
Firmware – S2011 and S3012
Revision: 1 (9/98)
92
© Saftronics, Inc.
13.1
Digital Operator Monitor Display
The following table shows the contents of the Digital Operator monitor display.
Table 28
Digital Operator Monitor Display
LED
Name
Description
Fref
Frequency reference
•
Frequency reference can be monitored/set.
•
Setting/display unit depends on display mode (n024).
Fout
Output frequency
•
Output frequency can be monitored.
•
Display unit depends on display mode (n024).
Iout
Output current
Output current can be monitored in units of 0.1 A (1 A for 1000 A and above).
kWout
Output voltage
Output voltage can be monitored in units of 0.1 kW (1 kW for 1000 k and above).
F/R
FWD/REV RUN
command
•
FWD/REV RUN command can be set/monitored.
•
Setting enabled during RUN command from Digital Operator.
•
FWD run displays For, REV run displays rev.
The following contents can be monitored.
No.
Contents
U
−
01
Frequency reference (same as Fref)
U
−
02
Output frequency (same as Fout)
U
−
03
Output current (same as Iout)
U
−
04
Output voltage reference can be monitored in units of 1 V
U
−
05
DC voltage can be monitored in units of 1 V
U
−
06
Output power (same as kWout)
Input terminal status can be monitored (Terminals S1 to S6)
U
−
07
Inverter status can be monitored
Montr
Monitor
U
−
08
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor
