Chapter 6: Programming Features
Firmware – S2011 and S3012
Revision: 1 (9/98)
36
© Saftronics, Inc.
6.1
Constant Set-up and Initialization
6.1.1.
Constant Selection/Initialization (n001)
The following table describes the data which can be set or read when n001 is selected.
Setting
Constant that can be set
Constant that can be read
0
(Constant write disable)
n001
n001 to n108
1
(Factory setting)
n001 to n034
n001 to n108
2
n001 to n049
n001 to n108
3
n001 to n108
n001 to n108
4, 5
Not used (disabled)
8
Initialize: 2-wire sequence
9
Initialize: 3-wire sequence
[
[
Refer to Page 50.
6.2
V/f Pattern Setting
V/f pattern can be set by constant n010.
Set value 0 to E:
Preset V/f pattern can be selected.
F :
Custom V/f pattern can be set.
efesotomasyon.com - Control Techniques,emerson,saftronics -ac drive-servo motor
