4.2.2
Names Configuration
1.
System name (Max length: 16 characters) –
allows entering preferable system
name. Maximum length of the system name cannot exceed 16 symbols. Default
name is ‘SAF’ (command line –
system name
<name>
);
2.
Location name (Max length: 16 characters) –
allows entering preferable system
location name. Maximum length of the location name cannot exceed 16 symbols. By
default system location is not specified (command line –
system location
<name>
);
3.
Pressing
„Execute configuration”
applies changes made to the corresponding
section only for the local side CFIP Lumina. If
„Rollback on”
is selected, configuration
will be reverted in case of erroneous configuration changes applied.
4.2.3
Other configuration
1.
Web refresh (2
..
60 sec) –
allows specifying time interval of Web data refreshing.
The default value is 5 seconds. You can choose between 2 and 60 seconds
(command line –
web refresh
<web refresh time>
);
2.
Time (Usage: YY-MM-DD HH:mm:ss) –
allows changing system date and time
manually by entering date and time in specific syntax. “
Set local machine time
”
button forces system to use the time set on your PC or laptop, from which you are
connected to the Web interface (command line –
system time
[yyyy-mm-dd
hh:mm:ss]
);
3.
Pressing
„Execute configuration”
applies changes made to the corresponding
section only for the local side CFIP Lumina. If
„Rollback on”
is selected, configuration
will be reverted in case of erroneous configuration changes applied.
4.
Write to config file -
saves to configuration file all the changes made (command line
–
cfg write
);
5.
Restarts CFIP Lumina you are connected to (command line –
system reset
);
access set
<guest|admin>
<password> [plaintext]
Allows specifying a new password for a specific account (admin or guest).
‘
plaintext
’ option will save the password in plaintext in configuration script
without encrypting it (by default saved passwords in configuration file are
encrypted).
access show
Shows user name and password’s hash of the user currently logged
on.
access list
Shows the list of usernames and passwords the current account is able to
manage (if logged on as admin, ‘guest’ and ‘admin’ account passwords will
be seen).
(!)
Note that after restarting the CFIP will use only those settings, which are written to
the configuration file. Other settings will be set to default values
.
The CFIP Lumina Series Full Outdoor Unit Technical Description and Configuration Guide • Rev. 1.10 •
© SAF Tehnika JSC 2013
