Saeco RI9722/11, Service Manual

Page: 69 / 224

INCANTO S-CLASS 5. SERVICE PROGRAMME
Saeco International Group REV.1 FEB.2005 Page 17/18
Function/Standard Setting range Increment Comments
TOTAL WATER
(ml) Number Total water flow volume (in ml) /
not resettable
WATER DESCALING
(ml) Number 0 – 999999999 Total water flow (in ml) since last
descaling / resettable
WATER SINCE
DESCALING
(ml) Number 0 – 999999999 Water flow since the need for
descaling was signalled.
(reset via descaling procedure)
From Version: 2.00.3
NUMBER OF
DESCALING
PROCESSES:
Number Number of times descaling has
been performed (not resettable)
From Version: 2.00.3
NUMBER OF
CLEANING
PROCESSES
Number Number of times cleaning has been
performed (not resettable) 2.00.3
WATER FILTER
(ml) Number 0 – 999999999 +/- 1 Total water flow (in ml) since last
filter reset (60,000 - replace filter)
HOT WATER
FLOW (l/h) 18 6 – 34 1/h +/- 2 1/h The pump delivery rate for hot
water can be expressed in litres per
hour.
HOT WATER
PUMP ADJUST. 63000 58,000 – 65,500 +/- 1 The pump delivery rate is adjusted
in relation to the HOT WATER
FLOW setting by means of a phase
controlled modulator. Pump
tolerances can thus also be
adjusted. An equivalent value is
saved under HOT WATER PUMP
ADJUSTMENT.
WATER RESERVE
counter
Pulses NUMBER When the filled water tank is
installed, the value changes to the
value set for Water Stop (420).
When the reed sensor is switched,
the flow meter pulses are recorded.
If the value is 0 or if a coffee
programme has been memorised
with a higher pulse number, the
signal to fill the water tank will
appear.
WATER RESERVE
STOP
Pulses 420
Residual water quantity
determined in terms of pulses from
when the reed switch switches,
down to the water tank floor.
DESCALING
NUMBER Status of descaling programme
0/1 (1= Programme activated)
CLEANING CYCLE
NUMBER Status of cleaning programme
0/1 (1= Programme activated)