Saeco RI9722/11, Service Manual

Page: 122 / 224

2. TECHNICAL DATA INCANTO
Page 2/3 REV.5 FEB.2005 Saeco International Group
2. Technical Data
(Incanto Rapid Steam)
INCANTO RAPID STEAM
Technical data
Power supply/output: 230V 50Hz 1250W
Safety system: 170°C Safety thermostat for instantaneous water
heater
Temperature monitoring:
KTY Temperature sensors transmit respective
temperatures to electronic system
Continuous flow thermoblock: Instantaneous water heater (1090 W) for coffee and
hot water dispensing
Pipe heating: 1000W – Steam dispensing (rapid steam)
Pump:
Ulka reciprocating piston pump,
230V, 50 Hz, 48 W, Type EX5, 20 l/h
Safety valve: Conventional safety valve (17 bar) connected
directly to pump.
Water filter: In water tank, installed at outlet.
Gearmotor: Direct current, 30 - 35 V
Gear resistor Approx. 437W / 130 ȍ
Cup warmer PTC - Approx. 30 W at operating temperature
(approx. 60
°°°° C)
Grinder (conical): Plastic grinding screw, galvanised steel grinding
cone and grinding disc
Grinder motor: 260 V Direct current
Second Doser: 230 V - Magnet coil
Power consumption: During heating - approx. 4.5 A
Pump pressure: Max. 15 bar
Dimensions W x D x H in mm: 265/400/360
Weight: Approx. 10.5 kg
Coffee bean container capacity: Approx. 180g
Water tank capacity: Approx. 1.7l max.
Instantaneous water heater capacity: Approx. 1.0 ccm, 10 ml volume
De-aeration time: Approx. 10 for initial start-up
Heating time: Approx. 1.5 min. with water at 10°C to operating
temperature
Steam heating time: From coffee temperature to 127°C - Approx. 50 sec.
Coffee dispensing temperature: Approx. 86° C
Grinding time: Initial grinding with completely empty machine.
Approx. 15 sec. / each subsequent grinding: approx.
4-6 sec.
Time to make expresso: Approx. 28 sec. for 50 ml
Time to make cup of coffee: Approx. 40 sec. for 100 ml