Saeco RI9722/11, Service Manual

Page: 170 / 224

5. SERVICE PROGRAMME INCANTO
Page 10/11 REV.5 FEB.2005 Saeco International Group
Function/Standard
Setting range Increment Comments
WATER DESCALING
(ml) Total water flow (in ml) since last
descaling / resettable.
HOT WATER
FLOW (l/h) 20 6 - 34 1/h +/- 2 1/h The pump delivery rate for hot
water can be expressed in litres
per hour.
HOT WATER
PUMP ADJUST. 63000 58,000 - 65,500 +/- 1 The pump delivery rate is adjusted
in relation to the HOT WATER
FLOW setting by means of a
phase controlled modulator. Pump
tolerances can thus also be
adjusted. An equivalent value is
saved under HOT WATER PUMP
ADJUSTMENT.
WATER RESERVE
COUNTER
NUMBER When the water tank is full, the
value from WATER RESERVE
STOP is applied. The flow meter
pulses are counted from when the
reed switch is switched and
deducted from the value. If a
beverage is chosen for which the
saved pulse number is higher than
the remaining pulses, the message
FILL WATER TANK appears.
WATER RESERVE
STOP 600 Water reserve from when the read
switch is switched to pulses.
MACHINE STATUS
36
0 - 255 Programme code
--DATE OF MANUF---
DAY
--------------------- ---------------------
--
--DATE OF MANUF---
MONTH
--------------------- ---------------------
--
--DATE OF MANUF---
YEAR
--------------------- ---------------------
--
This date indicates when the
machine was manufactured. This
date cannot be changed.
--SERVICE DATE--
DAY 0 - 31 +/- 1
--SERVICE DATE--
MONTH 0 - 12 +/- 1
--SERVICE DATE--
YEAR 1996 - 2050 +/- 1
The service date indicates the date
of the machine's last service. This
date can be changed and must be
updated at each service.
Exit: Switch the machine off at the main switch.