Saeco DUALLY, Operation And Maintenance

Page: 94 / 324

English
7
94
• Wait for the pre-heating phase to be completed.
1 The machine is warming up
When the messages disappear from the screen and the
keys become clearer, the machine is ready for brewing.
In line with the coffee dispensing spout where the
container is placed:
• Open and close the capsule loading tray and press the
“FREE” button - with no capsule inserted - to start
brewing.
• When the water starts flowing from the spout, press the
"FREE" button again to stop dispensing.
• If machine does not detect water into circuits, a pump
priming alert will be shown: press on image and wait for
automatic priming procedure completition.
Repeat the rinsing of the circuits on the other side of the
machine, so that both sides are rinsed, then proceed.
Hot water and steam
may
cause scalding!
Follow the
WARNINGS and
instructions described
in
chapter "Steam
knob" to:
• Dispense a cup of water by pressing the corresponding
display button.