18
GB
Did not observe the sequence for
switching the mower on.
Switch holder and switch-on lever of the
mower must be actuated in the specified
sequence.
Too much grass residue underneath
the housing
Remove grass from cutting space.
Keep gap between fan and housing clean.
Check cutting blade for freedom of motion.
Attention! Please observe safety
information before starting these activities.
Get it checked by an authorized workshop.
Mower will not move forward
Drive control bracket not pulled.
Pull drive switch bar
G
.
Have it checked by an authorized dealer.
Drive speed cannot be regulated
Have it checked by an authorized dealer
Extreme vibration
Have it checked by an authorized dealer
Cut not clean,
lawn turns yellow
Cutting blade blunt.
Have it sharpened and balanced by an
authorised workshop
Q
.
Cutting height too low.
Set higher cutting height
I
Motor speed too low.
Work at max. speed.
Mowing speed too high.
Adapt mowing speed, switch motor drive off
if necessary.
Insufficient overlap between mowing
lanes.
If grass is long, the mowing lanes may need
to overlap further.
Lawn matted.
A perceptible improvement can be achieved
by using a scarifier.
Ejector blocked
TurboSignal ignored
J
+
K
.
Empty the collecting bag
L
.
Motor speed too low.
Work at max. speed.
Cutting height too low with grass too
high.
Set higher cutting height
I
Mowing speed too fast.
Adapt mowing speed, switch motor drive off
if necessary.
Grass is damp.
Allow the lawn to dry.
The mulched grass does not look
good:
clumps, excessive cut material,
coarse cut
Cutting blade blunt.
Have it sharpened and balanced by an
authorised workshop
.
Mulching rule ignored (cut max. 1/3
of grass height; the grass height to
be cut must be less than 10 cm)
Set higher cutting height
I
Convert mower
to rear ejection
U2
+
S1
and mow lawn
with high cutting height first.
Driving speed too high.
Adapt driving speed, switch motor drive off
if necessary.
Grass accumulation under the
mower blade.
Set higher cutting height
I
Insufficient overlap between mowing
lanes.
If grass is long, the mowing lanes may need
to overlap further.
Grass is damp.
Set higher cutting height
I
Allow the lawn to dry.
In case of faults and defects which have not been listed here, please contact the nearest authorized dealer.
Repairs which require specialized knowledge should only be performed by a qualified expert. Your authorized dealer will
naturally also be glad to help if you do not wish to perform the maintenance work described here yourself.
Summary of Contents for 47-K VARIO B
